There are some members who have oversize avatars that spill onto the text and photo portion of the page which makes reading the text difficult. Is there any way that these members can modify their avatars to a more appropriate size? Is it simply a matter of resizing the original photo?
+2
jholl72
Infanteer
6 posters
Oversize avatars
jholl72- Administrator
- Posts : 949
Join date : 2009-11-24
Age : 52
Location : Ontario, Canada
- Post n°2
Re: Oversize avatars
Hey Steve,
I also find it irritating. I have looked in the admin panel, there are size restrictions on the avatars in place, perhaps they are not functioning properly. Dale would have to send an email and try and sort that one out.
The other option is for those members with overly large avatars to resize them and then reload them to the forum.
Perhaps, Perth Regiment(MG) could try it out and let us know if it works.
I will link him to this thread and see what we can work out.
I also find it irritating. I have looked in the admin panel, there are size restrictions on the avatars in place, perhaps they are not functioning properly. Dale would have to send an email and try and sort that one out.
The other option is for those members with overly large avatars to resize them and then reload them to the forum.
Perhaps, Perth Regiment(MG) could try it out and let us know if it works.
I will link him to this thread and see what we can work out.
_________________
Regards,
Jeff
mk1rceme- Administrator
- Posts : 2215
Join date : 2009-11-22
Age : 53
Location : Alberta, Canada
- Post n°3
Re: Oversize avatars
Took me 30 secs to resize...easy. He can either copy this one or resize himself and change it.
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]
_________________
Dale
Admin-CMCF
jholl72- Administrator
- Posts : 949
Join date : 2009-11-24
Age : 52
Location : Ontario, Canada
- Post n°4
Re: Oversize avatars
I checked his original avatar pic was exactly what the forum requirements are. 300 x300 pixels, 46 kb. So its the forum not displaying it properly.
I just resized it and uploaded it to his profile, so we'll see if it changed.
I just resized it and uploaded it to his profile, so we'll see if it changed.
_________________
Regards,
Jeff
jholl72- Administrator
- Posts : 949
Join date : 2009-11-24
Age : 52
Location : Ontario, Canada
- Post n°5
Re: Oversize avatars
Its better but still not small enough. There's also a problem with his signature line, its way up top on his posts instead of at the bottom.
Its just the new members that have the larger avatars despite meeting the forums requirements. We can have them go back and resize their pics but that will only solve the problem for now........until more new members join.
Its just the new members that have the larger avatars despite meeting the forums requirements. We can have them go back and resize their pics but that will only solve the problem for now........until more new members join.
_________________
Regards,
Jeff
Bill- Moderator
- Posts : 1120
Join date : 2009-11-28
- Post n°6
Re: Oversize avatars
I would sure like a solution. I changed my avatar and it is doing the same thing, even after I shrunk the original image.
Bill- Moderator
- Posts : 1120
Join date : 2009-11-28
- Post n°7
Re: Oversize avatars
Fiddled with it some more and it is now smaller.
pylon1357- Global Moderator
- Posts : 1351
Join date : 2009-11-24
Location : Resting on my laurels in Ottawa
- Post n°8
Re: Oversize avatars
I just updated my avatar... set to 225x300 pixels, size is 9.37kb. lets see what it looks like
pylon1357- Global Moderator
- Posts : 1351
Join date : 2009-11-24
Location : Resting on my laurels in Ottawa
- Post n°9
Re: Oversize avatars
well that is not much bloody good now is it.
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]
pylon1357- Global Moderator
- Posts : 1351
Join date : 2009-11-24
Location : Resting on my laurels in Ottawa
- Post n°10
Re: Oversize avatars
My latest Avatar is set to 180X200 pixels and is 5.79KB. seems ok now. Certainly is a far cry from the stated maximum dimensions.
mk1rceme- Administrator
- Posts : 2215
Join date : 2009-11-22
Age : 53
Location : Alberta, Canada
- Post n°11
Re: Oversize avatars
I reset it to 200x200 pixels. Let me know if you's guy's want them smaller
_________________
Dale
Admin-CMCF
Canadian Corporal- Member
- Posts : 94
Join date : 2013-03-20
Age : 57
Location : Beloeil, Quebec
- Post n°12
Re: Oversize avatars
I just finished re-sizing mine. Seems to work.
pylon1357- Global Moderator
- Posts : 1351
Join date : 2009-11-24
Location : Resting on my laurels in Ottawa
- Post n°13
Re: Oversize avatars
Canadian Corporal wrote:I just finished re-sizing mine. Seems to work.
It is about darn time you squared your avatar away John. So how is life treating you at 202 now we are all gone?
Canadian Corporal- Member
- Posts : 94
Join date : 2013-03-20
Age : 57
Location : Beloeil, Quebec
- Post n°14
Re: Oversize avatars
Hi ya Cliff. Things are going well at 202. We are going through all your parts and squaring them away, all filters, engine parts, chassis, electrical, etc... batched together, cataloged and tagged. We have filled the 2 big grey parts lockers already and we are not even 1/2 way through. Looks like its going to take a while to go through all of them. I went by Prefair and scored some items. Will post them in the found forum. Cheers!
pylon1357- Global Moderator
- Posts : 1351
Join date : 2009-11-24
Location : Resting on my laurels in Ottawa
- Post n°15
Re: Oversize avatars
Have fun with those pars. LOL. Have you guys separated all the civilian pattern parts that were received? I have no idea how many tail lights we got, something like 50 at least. All need to be returned for credit.
That whole project needs to be re-scaled correctly and the correct parts ordered. I mean how the heck is it possible that even in AFG we were unable to get the correct brake chamber? Just ridiculous.
That whole project needs to be re-scaled correctly and the correct parts ordered. I mean how the heck is it possible that even in AFG we were unable to get the correct brake chamber? Just ridiculous.
|
|